Spring Balancer - EW/EWS/EWF Spring Balancer Manufacturer from Pune

BC1 control module

Hoisting capacity 0~140kg

This is a single balancing module type.

Balance a suspended load that is specified within the range of 0 to the maximum hoisting capacity.
Use the regulator on the side of the main equipment to specify the weight of the suspended load and balance the load.
You can manually perform a balancing operation over the full range of a stroke.
This feature facilitates load-lifting operations.

Control module specifications:

Name	Model	Mass(kg)
Lift control module	BC1	1

Air Balancer SeriesWire ropeSpecification:

Model	Air pressure (MPa)	Hoisting capacity(kg) for lifting	Stroke (m)	Main equipment mass (kg)	Wire rope diameter (mm)	Air inlet
EHB-50S	0.7	55	0.7	19	Φ4.76	Rc 3/8
	0.6	48
	0.5	40
	0.4	32
EHB-50	0.7	55	1.9	28	Φ4.76	Rc 3/8
	0.6	48
	0.5	40
	0.4	32
EHB-85	0.7	90	1.9	29	Φ4.76	Rc 3/8
	0.6	75
	0.5	62
	0.4	50
EHB-130	0.7	140	1.9	36	Φ4.76	Rc 3/8
	0.6	120
	0.5	100
	0.4	80

Air Balancer Series(Load chain)Specification:

Model	Air pressure (MPa)	Hoisting capacity(kg) for lifting	Stroke (m)	Main equipment mass (kg)	Link chain (Dia. x No. of falls)	Air inlet
EHB-50SC	0.7	55	0.65	20	4.0×1	Rc 3/8
	0.6	48
	0.5	40
	0.4	32
EHB-50C	0.7	55	1.8	29	4.0×1	Rc 3/8
	0.6	48
	0.5	40
	0.4	32
EHB-85C	0.7	90	1.8	30	4.0×1	Rc 3/8
	0.6	75
	0.5	62
	0.4	50
EHB-130C	0.7	140	1.8	37	4.0×1	Rc 3/8
	0.6	120
	0.5	100
	0.4	80

Accessories

-Rail System

This system allows horizontal movement of lifting equipment, enabling easy transportation and transfer by hand.

-Jib Crane

A floor-mounted jib crane is available as an accessory.
The traveling rail is made of aluminum, enabling light and smooth operation.