Spring Balancer - EW/EWS/EWF Spring Balancer Manufacturer from Pune

MS-ATC type Module

Pendant type for hand operation
Hoisting capacity 0~140kg

The up and down buttons and handle are mounted on the lower hook.

While ensuring the stability of a suspended load, the balancer provides better controllability compared to the standard pendant type.
Speed control is available using the speed adjustment screw of the lift control module.
The fall-arrest device prevents the load from dropping even if the air supply is shut off or when the pendant switch hose breaks.

Control module specifications

Name	Model	Hose	Operation	Mass(kg)
Lift control module	MS-ATC	Coil×3	Pendant type	6

Air Balancer Series (Wire rope)Specification:

Model	Air pressure (MPa)	Hoisting capacity(kg) for lifting	Stroke (m)	Main equipment mass (kg)	Wire rope diameter (mm)	Air inlet
EHB-50S	0.7	55	0.7	19	Φ4.76	Rc 3/8
	0.6	48
	0.5	40
	0.4	32
EHB-50	0.7	55	1.9	28	Φ4.76	Rc 3/8
	0.6	48
	0.5	40
	0.4	32
EHB-85	0.7	90	1.9	29	Φ4.76	Rc 3/8
	0.6	75
	0.5	62
	0.4	50
EHB-130	0.7	140	1.9	36	Φ4.76	Rc 3/8
	0.6	120
	0.5	100
	0.4	80
EHB-270	0.7	270	1.8	43	Φ6	Rc 3/8
	0.6	230
	0.5	190
	0.4	150

Air Balancer Series (Link chain)Specification:

Model	Air pressure (MPa)	Hoisting capacity(kg) for lifting	Stroke (m)	Main equipment mass (kg)	Link chain (Dia. x No. of falls)	Air inlet
EHB-50SC	0.7	55	0.65	20	4.0×1	Rc 3/8
	0.6	48
	0.5	40
	0.4	32
EHB-50C	0.7	55	1.8	29	4.0×1	Rc 3/8
	0.6	48
	0.5	40
	0.4	32
EHB-85C	0.7	90	1.8	30	4.0×1	Rc 3/8
	0.6	75
	0.5	62
	0.4	50
EHB-130C	0.7	140	1.8	37	4.0×1	Rc 3/8
	0.6	120
	0.5	100
	0.4	80

Accessories

-Rail System

This system allows horizontal movement of lifting equipment, enabling easy transportation and transfer by hand.

-Jib Crane

A floor-mounted jib crane is available as an accessory.
The traveling rail is made of aluminum, enabling light and smooth operation.