Spring Balancer - EW/EWS/EWF Spring Balancer Manufacturer from Pune

MS-A type module

Speed control is available using the speed adjustment screw of the lift control module.
With the floating feature, you can raise and lower the suspended load over an approx. 35 cm range from the stop position while holding the load by hand.
This type is equipped with a fall-arrest device.
The device prevents the load from dropping even if the air supply is shut off or the pendant switch hose breaks.
Two types of controller are available: pendant type and grip type.

With the grip type controller, you can slide the controller up and down while holding the grip.

Control module specifications:

Name	Model	Hose	Operation	Mass(kg)
Lift control module	MS-A	Straight×3	Pendant type	3.5
Lift control module	MS-AG	Coil×3	Grip type	6

Air Balancer Series (Wire rope)Specification:

Model	Air pressure (MPa)	Hoisting capacity(kg) for lifting	Stroke (m)	Main equipment mass (kg)	Wire rope diameter (mm)	Air inlet
EHB-50S	0.7	55	0.7	19	Φ4.76	Rc 3/8
	0.6	48
	0.5	40
	0.4	32
EHB-50	0.7	55	1.9	28	Φ4.76	Rc 3/8
	0.6	48
	0.5	40
	0.4	32
EHB-85	0.7	90	1.9	29	Φ4.76	Rc 3/8
	0.6	75
	0.5	62
	0.4	50
EHB-130	0.7	140	1.9	36	Φ4.76	Rc 3/8
	0.6	120
	0.5	100
	0.4	80
EHB-270	0.7	270	1.8	43	Φ6	Rc 3/8
	0.6	230
	0.5	190
	0.4	150

Air Balancer Series (Link chain)Specification:

Model	Air pressure (MPa)	Hoisting capacity(kg) for lifting	Stroke (m)	Main equipment mass (kg)	Link chain (Dia. x No. of falls)	Air inlet
EHB-50SC	0.7	55	0.65	20	4.0×1	Rc 3/8
	0.6	48
	0.5	40
	0.4	32
EHB-50C	0.7	55	1.8	29	4.0×1	Rc 3/8
	0.6	48
	0.5	40
	0.4	32
EHB-85C	0.7	90	1.8	30	4.0×1	Rc 3/8
	0.6	75
	0.5	62
	0.4	50
EHB-130C	0.7	140	1.8	37	4.0×1	Rc 3/8
	0.6	120
	0.5	100
	0.4	80

Accessories

-Rail System

This system allows horizontal movement of lifting equipment, enabling easy transportation and transfer by hand.

-Jib Crane

A floor-mounted jib crane is available as an accessory.
The traveling rail is made of aluminum, enabling light and smooth operation.